ENF29-S-00500-L-1-0-0-0

ENF29-S-00500-L-1-0-0-0
ENF29-S-00500-L-1-0-0-0

直线运动单元,


  • The ENF option consists of two 500 mm long ENT14x16 sensor rails mounted on each end of the unit on the left or right side of the profile.
  • In cases where the unit is too short to allow two 500 mm sensor rails to be mounted, then one rail is mounted along the entire profile of the unit. (Same as in ENK)
  • The sensors are fitted to the sensor rail by the customer at the desired positions.
  • Note1! WM120 and WV120 units do not require any ENF or ENK options as the EN2 sensors can be fitted directly to the profile of the units.
  • Note2! The ES limit switch option and ENT rail cannot be mounted on the same side of the unit.
  • Note3! Movopart M50/75/100 units require adapter plates for mounting the ENF/ENK to the profile.

Dimensions

dimensions
尺寸价值
长度500 毫米 

Specifications

Specifications价值
Mounting side of the unitLeft Side 
Number of CarriagesSingle Carriage 
Number of EN2, NC w 10m cable
Number of EN2, NC w 2m cable
Number of EN2, NO w 10m cable
Number of EN2, NO w 2m cable
Use withMF/MG06K 

Get Quote

*Please fill out the information below so we can best assist you:

您想定期收到汤姆森电子邮件更新,包括应用故事,在线培训的机会,新产品信息和链接在线设计工具。