专为运输级应用（如包装、物料搬运和工厂自动化）设计的经济型直线单元。
联系我们，获得免费资源！
联系我们，获得免费资源！
Thomson 精密梯形丝杠
Thomson 精密梯形丝杠
全球最全面的执行器选择方案
Thomson 直线运动系统
请选择您的登录帐户
查找产品
Click any cell in any of the categories of the availability grid for critical information.
选择解决方案
New Sizing Tool
The New and Improved Sizing Tool for Linear Units
LinearMotioneering
Size Your System
Sizing & Selecting Your System by Application Needs (Legacy)
联系Thomson
Questions? Email, call or chat with us.
第一步 - 绘制运动曲线
输入运动曲线参数
| 运动曲线输出 | 公制 | 英制 |
|---|---|---|
| 最大速度 | ||
| 加速度 | ||
| 平均速度 | ||
| 移动时间 |
运动曲线
- 梯形：加速度、恒速、减速度
- 三角形：加速度、减速度
- 自定义多个分段：根据需要创建运动曲线分段，并分别进行定义。
End Fixity Type
末端固定是一种用于支撑滚珠丝杠组件末端的轴承配置。此处展示了3中常见的末端固定配置选项。固定加自由的组合方式支撑较少，而固定加固定的组合方式支撑较多。末端固定可影响丝杠的最大RPM和屈曲负载。
Move Profile Type
运动曲线分为三个等时间段或等距离段（加速度、恒速、减速度）。更多自定义选项，可查看多分段运动曲线选项。”
Max Stroke Length
末端支撑间距离（丝杠螺纹长度）。
移动距离
螺母行程距离总长。该距离不一定是总行程长度。
第二步 - 输入应用数据
Orientation
Changing the orientation of the linear unit affects which axes gravity acts upon. All available linear units can be mounted in any orientation.
Total Mass to Move
Each linear unit has a specification for how much load it can support along each of its 3 axes. By entering in the total mass that needs to be moved, and the distances of the center of mass from the carriage, a resultant load for each axis is calculated.
Mass Carried By
In some cases, a linear unit can be used only to provide axis thrust on a mass. The weight of the mass being moved would then be supported by separate guide (such as a profile rail). In most cases, however, the weight of the mass is supported by the carriage of the linear unit itself.
Carriage Count
Some linear units are available with 2 carriages. Adding a second carriage spreads the load out across a wider area, allowing the unit to support higher total loads. The unit will also support much higher moment loads along the Y-axis. The overall length of the unit will be longer for a given stroke length on a double carriage unit
X-Axis Mass to Carriage Distance (Dx)
Enter in the distance (in the X-axis direction) of the center of mass of the object being moved.
Y-Axis Mass to Carriage Distance (Dy)
Enter in the distance (in the Y-axis direction) of the center of mass of the object being moved.
Z-Axis Mass to Carriage Distance (Dz)
Enter in the distance (in the Z-axis direction) of the center of mass of the object being moved.
External Forces
In some cases, in addition to the force of gravity while moving an object, external forces or moments will impact the carriage. Use the external forces section to enter in any additional forces or moments applied to the linear unit.
STEP 3 - Select Unit
Repeatability
Repeatability
Repeatability refers to the tolerance within which the linear unit returns to a given position.
Environment
Environment
Standard Factory Environment
This environment is characterized more as a shop setting than as a lab room. We can expect some airborne particles and some degree of humidity to be present; however, personnel would typically function in this environment without any form of protective gear (masks, respirators, local dust or chemical hoods). Typical applications: Packaging, material handling, general factory automation.
Extreme Dust/Fine Particle
This environment is characterized by enough airborne particles to require an operator to wear some form of respiratory protection Typical applications: Woodworking, grinding, metal turning.
Wash Down
Typical places where S1 is used as slaughter houses, dairy plants, food plants or in any other application where light wash down is needed. Typical applications: Dairy, slaughterhouses.
Wash Down - Corrosive
Typical places where 21 is used as moderately wet areas such as in paper mills, galvanizing equipment, food industries or in any other harsh environment where enhance wash down is required. The unit can be exerted to chemical within the pH range 4.5-8.5. Typical applications: Paper mills, galvanizing equipment, food industries.
Impact/Press/Vibration
This environment is defined as applications that would impart higher than normal loads on carriages or saddles due to initial impact dynamics. Typical applications: Punching machining, metal forming.
Select Units
The stated available options are based off your selections to this point. Refer to charts to the right.
Enclosed (Standard)可选Starting Price: $NaNLead Time: days
Families included:
Families included:
Exposed可选Starting Price: $NaNLead Time: days
Families included:
Families included:
High Speed可选Starting Price: $NaNLead Time: days
Families included:
Families included:
High Precision可选Starting Price: $NaNLead Time: days
Families included:
Families included:
High Moment可选Starting Price: $NaNLead Time: days
Families included:
Families included:
Availability Grid (Table updates as you progress through steps 1 to 3)
Grid result based on inputs on left. You may need to adjust the inputs to best tailor results.
CHART KEY (All colors but green indicate units that will not meet entered requirements)
| Enclosed (Standard) | Profile Width (mm) Travel Per Turn (mm) |
|---|---|
 | |
| Exposed | Profile Width (mm) Travel Per Turn (mm) |
|---|---|
 | |
| Profile Width (mm) Travel Per Turn (mm) | |
|---|---|
 | |
| High Speed | Profile Width (mm) Travel Per Turn (mm) |
|---|---|
 | |
| High Precision | Profile Width (mm) Travel Per Turn (mm) |
|---|---|
 | |
| High Moment | Profile Width (mm) Travel Per Turn (mm) |
|---|---|
 | |
Travel Per Turn
Travel per turn refers to the screw lead for ballscrew and leadscrew driven units. For belt driven units it refers to the distance the carriage travels on one motor revolution. For a given fram size, units with higher travel per turn will be able to achieve higher speeds but will have lower thrust load capacities.
Accessories/Mounting System
STEP 1 - Define the Motor Mount Adapter
Motor Requirements
A Thomson RediMount motor adapter is standard on all Thomson linear units. It will help you mount any motor or gearhead to a Thomson linear unit.
Select one of the three options below:
Select your motor adapter:
Selected Results:
Select Your Motor
Enter Your Dimensions
Range: 18 mm to 215.03 mm
Range: 0.5 mm to 52 mm
Range: 4 mm to 36 mm
Range: NaN mm to NaN mm
Range: NaN mm to NaN mm
MotorRediMount
SD=Shaft Diameter
SL=Shaft Length
FW=Flange Width
PD=Pilot Diameter
PLm=Pilot Length Motor
PLr=Pilot Length RediMount
BC=Bolt Circle Diameter
MHm=Mounting Hole Motor
MHr=Mounting Hole RediMount
Select RediMount ID
Changes made in this step will reset the shaft selections made in step 2.
No exact matches were found. The unit will be configured and priced and the dimensional information can be provided later.
STEP 2 - Add Accessories
Selected Results:
产品介绍
直线模组型号
Movoparts直线模组型号
MovoTrak™ 7th Axis
The first ever true collaborative range extender for cobots, featuring collision detection settings for groundbreaking programming and control benefits.
传统LMS 线性模组
请让Thomson帮您做出选择！
对于要求高速度、高负载、高刚度和高刚性精密直线运动的机械设计，直线模组是理想的解决方案。
为什么选择Thomson直线运动系统？
从高空间利用率系统到大型坚固解决方案，Thomson广泛的电动滑台都可针对您的高精密应用进行优化配置，满足各种严苛环境的要求。我们的系统标配RediMount™电机安装适配器套件，能够充分兼顾性能、寿命和成本。
直线模组定制选项
当Thomson标准线性模组不能满足您的设计要求时，我们的工程师可与您合作，设计定制解决方案。事实上，我们的直线运动系统在构建时都考虑到定制需求，可以通过灵活搭配模块，快速打造出适合您应用的高性价比解决方案。
直线模组选型不知从哪里入手?
Thomson提供丰富的在线资源，无论您的购买决策处于哪个阶段，都可以为您提供帮助：
视频：如何使用Thomson RediMount套件将电机安装到直线模组上
您无需再浪费宝贵的时间去寻找适合您设计的电机法兰套件，并将其组装起来。使用新的预装RediMount适配器套件，只需订购，然后在收货后用螺栓将其固定至电机或齿轮。本视频将向您展示具体操作步骤。
视频：直线系统：限位开关设置
Thomson工程师展示了如何将限位开关轨道安装至所有直线单元。如果您订购的是带直线单元的限位开关套件，则它是预安装的。但如果要调整这些传感器或单独订购，则安装也很容易。开关可以选择常闭或常开，并配有保护盖。
视频：耐冲洗的棱轨导向系统
Thomson推出了配备冲洗保护选项的MOVOPART M75皮带驱动棱轨导向单元。棱形导轨是一种工程聚合物，可沿挤压型材滑动。这种类型的轴承非常适合冲击负载、低噪音或者存在冲洗或腐蚀性环境的应用。
视频：高速度WH型直线模组
Thomson推出了WH SpeedLine皮带驱动导轮导向直线运动系统。这些单元非常适合采用多方向或多轴配置的高速应用。可选50和120 mm导轨宽度，速度可达10 m/s，行程可达11米。
视频：高精度WM型直线模组
WM系列具有内部活动滚珠丝杠支撑，允许长行程长度和高速运行。因此非常适合用于需要刚度、刚性和/或精度的应用，如机床自动化或测试和测量。Thomson可以提供长达11米的单元……
技术文章
-
为了应对环境可持续性、房地产价格不断攀升以及能耗等住宅问题，弗吉尼亚理工大学的FutureHaus工程团队设计出了屡获大奖的智能房屋原型，该原型使用了Thomson直线运动系统。
-
基本的直线运动系统中包含一系列组件，而这些组件内又进一步包含无数的子系统。本文旨在帮助设计工程师理解设计系统时的关键注意事项。
-
由于直线运动系统会暴露在各种极端环境和条件下，因此谨慎的系统选型和周密的工程审查是避免潜在风险的关键。
产品资料
手册
| Linear Motion Systems | 1257 KB | |
| Linear Motion Systems | 1425 KB | |
| Linear Units Quick Selection Guide | 427 KB | |
| Linear Units Quick Selection Guide | 1333 KB | |
| Linear Units Overview | 1057 KB | |
| Linear Units Overview | 1573 KB | |
| Miniature Components and Systems | 6871 KB | |
| Miniature Components and Systems | 6862 KB | |
| Miniature Components and Systems | 1603 KB | |
| WH SpeedLine Linear Units | 638 KB |
产品目录
| Linear Motion Systems | 9163 KB | |
| Linear Motion Systems | 9214 KB | |
| Linear Motion Systems | 9107 KB | |
| 直线运动系统 | 11683 KB | |
| M系列直线运动系统 | 4143 KB |
计算支持
数据表
| Linear Motion System Application Form | 74 KB | |
| Movopart Service Kit | 123 KB |
手册
技术视频
| Redimount Multimedia Flash Presentation | 1436 KB |
Technical Articles
CAD模型
-Ball Screw Units: Ball Guided LMS 2D/3D Interactive Models
| + Movopart MF/MG Linear Motion Systems | |||
| MG-B: Slide Guided, Screw Driven |  |
— | — |
| MF-S: Ball Guided, Screw Driven | |
— | — |
| + MLSM ForceLine Linear Motion Systems | |||
| MSLM Linear Units - MLSM60D / MLSM80D | |
— | — |
| + MicroStage MS Linear Motion Systems | |||
| MS Linear Units | |
— | — |
| + Rapidtrak TF/TG Linear Motion Systems | |||
| TF/TG 55 Rapidtrak Linear Units - TF06K, TG06K (Ball & Slide Guided) | |
— | — |
| TF/TG 75 Rapidtrak Linear Units - TF07K, TG07K (Ball & Slide Guided) | |
— | — |
| TF/TG 100 Rapidtrak Linear Units - TF10K, TG10K (Ball & Slide Guided) | |
— | — |
| + WM PowerLine Linear Motion Systems | |||
| WM (POWERLine) | |
— | — |
| WV (DYNALine) Linear Units | |
— | — |
-Ball Screw Units: Slide Guided LMS 2D/3D Interactive Models
| + Rapidtrak TF/TG Linear Motion Systems | |||
| TF/TG 55 Rapidtrak Linear Units - TF06K, TG06K (Ball & Slide Guided) | |
— | — |
| TF/TG 75 Rapidtrak Linear Units - TF07K, TG07K (Ball & Slide Guided) | |
— | — |
| TF/TG 100 Rapidtrak Linear Units - TF10K, TG10K (Ball & Slide Guided) | |
— | — |
| + Movopart MF/MG Linear Motion Systems | |||
| MG-B: Slide Guided, Screw Driven | |
— | — |
| MF-S: Ball Guided, Screw Driven | |
— | — |
| + WB Baseline Linear Motion Systems | |||
| WB Baseline Linear Units - WB40 / WB60 | |
— | — |
-Belt Units: Ball Guided LMS 2D/3D Interactive Models
| + Rapidtrak TF/TG Linear Motion Systems | |||
| TF/TG 55 Rapidtrak Linear Units - TF06B, TG06B (Ball & Slide Guided) | |
— | — |
| TF/TG 75 Rapidtrak Linear Units - TF07B, TG07B (Ball & Slide Guided) | |
— | — |
| TF/TG 100 Rapidtrak Linear Units - TF10B, TG10B (Ball & Slide Guided) | |
— | — |
| + Movopart MF/MG Linear Motion Systems | |||
| MG-B: Slide Guided, Belt Driven | |
— | — |
| MF-B: Ball Guided, Belt Driven | |
— | — |
| + WMZ PowerLine Linear Motion Systems | |||
| WMZ (POWERLine) | |
— | — |
| + WLSM ForceLine Linear Motion Systems | |||
| MLSM Linear Units - MLSM80Z | |
— | — |
| + MicroStage MS Linear Motion Systems | |||
| MS Linear Units | |
— | — |
| + WH SpeedLine Linear Motion Systems | |||
| WH (SPEEDLine) Linear Units | |
— | — |
-Belt Units: Slide Guided LMS 2D/3D Interactive Models
| + Rapidtrak TF/TG Linear Motion Systems | |||
| TG 50 Rapidtrak Linear Units - TF05B (Slide Guided only) | |
— | — |
| TF/TG 55 Rapidtrak Linear Units - TF06B, TG06B (Ball & Slide Guided) | |
— | — |
| TF/TG 75 Rapidtrak Linear Units - TF07B, TG07B (Ball & Slide Guided) | |
— | — |
| TF/TG 100 Rapidtrak Linear Units - TF10B, TG10B (Ball & Slide Guided) | |
— | — |
| + Movopart MF/MG Linear Motion Systems | |||
| MF-B: Ball Guided, Belt Driven | |
— | — |
| MG-B: Slide Guided, Belt Driven | |
— | — |
-Belt Units: Wheel Guided LMS 2D/3D Interactive Models
| + WH SpeedLine Linear Motion Systems | |||
| WH (SPEEDLine) Linear Units | |
— | — |
| + MLSH ForceLine Linear Motion Systems | |||
| MLSH Linear Units - MLSH60Z | |
— | — |
-Linear Lifting Units
| + WHZ SpeedLine Linear Motion Systems | |||
| WHZ Linear Lifting Units - WHZ50/WHZ80 | |
— | — |
-Handling Components: Movorail Crane Rail System 2D/3D Interactive Models
| + Movorail Rail Systems | |||
| Movorail Rail Profile - SPR 85 | |
— | — |
| Movorail Rail Profile - SPR 125 | |
— | — |
| Movorail Rail Profile - SPR 160A | |
— | — |
| Movorail Rail Profile - SPR 295B/295W | |
— | — |
| + Movorail Rail System Parts | |||
| ASU Adjustable Suspension | |
— | — |
| BGR Motion Limiter Kits | |
— | — |
| BGV Bogie Trolleys | |
— | — |
| BGV Bogie Trolleys with Rollers | |
— | — |
| BUB/TBUB Flexible Bolt Connections | |
— | — |
| DBSU Flexible Suspension | |
— | — |
| EPF Endplate Support | |
— | — |
| HXL/VXL Pneumatic Switches | |
— | — |
| KBV Cable Trolley | |
— | — |
| LPV Crab Trolleys | |
— | — |
| MBE1B/MBE3 Trolley Cardan Joints | |
— | — |
| SK Rail Connections | |
— | — |
| SPB Curved Rail Profiles | |
— | — |
| STP Endstops | |
— | — |
| STV5/STVG5 Pick Up Trolleys | |
— | — |
| TBM T-slot Bolts | |
— | — |
| TMT Motor Trolley | |
— | — |
| TPL Endplates | |
— | — |
| VBKLA I-beam Clamps | |
— | — |
| WBM Walter Bolt | |
— | — |
-Movopart Accessories
-Legacy LMS 2D/3D Interactive Models
| + 2EB SuperSlide Linear Motion Systems | |||
| 2EB Linear Units - 2EB08 | |
— | — |
| 2EB Linear Units - 2EB12 | |
— | — |
| 2EB Linear Units - 2EB16 | |
— | — |
| 2EB Linear Units - 2EB24 | |
— | — |
| + 2HE AccuSlide Linear Motion Systems | |||
| 2HE Linear Units - 2HEM10 | |
— | — |
| 2HE Linear Units - 2HEM20 | |
— | — |
| + 2RE SuperSlide Linear Motion Systems | |||
| 2RE Linear Units - 2REM12 | |
— | — |
| 2RE Linear Units - 2REM16 | |
— | — |
| + MLSH ForceLine Linear Motion Systems | |||
| MLSH Linear Units - MLSH80Z | |
— | — |
综合介绍
综合介绍
To provide better service to you on our websites, we and our service providers use cookies to collect your personal data when you browse. For information about our use of cookies and how to decline them or turn them off please read our cookie policy [available here].